Our V50 / 47Watt-Hour Lithium Polymer battery features two 5V USB output ports: both rated at 2A with a combined total of 3A available. The USB Battery Pack has the critical "Always On" operating mode that is required for long-term deployment using our UpBlink, BlinkX and Blink controllers.

About
Compatibility
FAQ's
Support
Return Policy

Under normal circumstances, the standard GoPro battery will last for one to two hours of shooting. Our UpBlink, BlinkX and Blink controllers can be programmed to turn the camera off between shots to only have the camera powered on when the footage is needed. However, while Blink can extend the length of time the GoPro cameras can be deployed on the internal GoPro battery, the total amount of time the camera can remain powered on is still the same. Our 47Wh battery increases the GoPro battery life by approximately 12x and has the Always On operating mode required for use with our UpBlink, BlinkX and Blink controllers.
Note: UpBlink and BlinkX requires an external power source and cannot be powered directly from the GoPro battery.

There are a lot of battery packs available, however, don't be fooled by cheaper alternatives. Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if it is not continuously supplying power. Often, this feature is not even mentioned in the battery description, and only discovered when you find the camera's internal battery is dead, even though the high powered battery pack is still fully charged.

Calculating battery life is non-trivial. It depends on the camera model, firmware version, SD card speed, lighting conditions, battery size, age of the battery, ambient temperature, and more. To help you understand the issues and to calculate estimated battery life, consult the Camera Power Consumption Study and our Time Lapse Calculator.

Up to two V50 / 47Wh battery packs fit in our Weather Resistant DryX/SolarX Outdoor Enclosures.

Two Operating Modes
- Always On mode that is required when using our Blink or BlinkX since it prevents the battery from automatically turning off due to periods of inactivity. Just plug into either output port and Always On is automatically activated.
- Automatic Off mode will automatically turn the battery off. Just remove the cables from your battery and the unit will automatically switch off.
Two USB Outputs
- 2 x 5V, 2A USB port that is recommended for powering the GoPro camera and other accessories.
- Total capacity: 3A shared between the ports.
Reliable Charging Circuit
- The battery is protected against failure due to overcharging, over discharge, overcurrent (short circuit), unusual voltage input, and temperature extremes.
LED Power Indication
- LEDs light sequentially when charging to indicate the current capacity at < 33% (1 LED), 33-66% (2 LEDs), 66-95% (3 LEDs), 95%+ (4 LEDs). A flashing LED indicates the battery is charging
Battery Specifications:
- Capacity: 12,800 mAH, 47 Wh
- Output: 5V-2A x 2 outputs, 3A total shared between 2 ports.
- Input: 5-6V/2A MicroUSB and 5V/2A USB-C
- Maximum Output Power: 15 Watts total (3A @ 5V)
- Weight: 9.6 oz (272 g)
- Dimensions: 4.5 x 3.1 x 1.0 in. (11.4 x 7.8 x 2.6 cm)
- Inclusions: V50 battery pack and USB to microUSB charging cable

Camera	Compatibility ( Y / N )
HERO10/11 Black	✔*
HERO5-8 Black	✔*
HERO5 Session	✔*
HERO4 Black	✔
HERO4 Silver	✔
HERO4 Session	✔
HERO (2014)	✔
HERO3+ Black	✔
HERO3+ Silver	✔
HERO3 Black	✔
HERO3 Silver	✔
HERO3 White	✔
HERO2	✔
HERO	✔

*Does not include USB-C cable

Compatible with 5V USB Devices.

Frequently Asked Questions

How long will the battery last before it is discharged?

It depends on many factors: the controller you are using, the camera you are using and the shooting schedule you have programmed. There are just too many variables to give an accurate answer.

In theory, the 4,000 mAH V15 battery combined with the standard GoPro 1,050 mAH battery will give you about 5 times the shooting time.

The 12,800 mAH V50 battery combined with the standard GoPro 1,050 mAH battery should give you more than 12 times the shooting time.

An analysis of the power consumption of the various GoPro cameras and an explanation of how to calculate the theoretical battery life is outlined on the GoPro Power Consumption page. Our Time Lapse Calculator page can be used to assist you in planning the interval times of your time lapse project.

How can I tell when the battery is in Always On mode?

Unlike the V44 which was more complicated, all you need to do is plug your device into the V50 and the battery goes into Always On mode automatically.
General support can be found on our Support pages here.
- Time Lapse Calculator
- General Time Lapse Information
Average GoPro recording times in each video setting (limited by battery capacity)
- HERO4 Recording Time
- HERO3+ Recording Time
- HERO3 Recording Time
Also read the FAQ's tab for more information.
What is your return/exchange/warranty policy?

A: We have a 15 day return policy for unused products. Product must be in original packaging and in new condition. For orders (over $1,500) and/or physically larger items (e.g. enclosures), a restocking fee of 10% will apply. Return shipping is the responsibility of the customer.

If the product is opened or used, the product can be returned within 15 days (except SD Cards and GoPro cameras which cannot be returned once opened). A 20% restocking fee will apply for refurbishing opened product. Return shipping is the responsibility of the customer.

If you are having trouble with the product, make sure you check our support area on the website for our Quick Start Guides and Product Documentation. Should you need additional help please contact support@cam-do.com however, please ensure you have submitted all of the information in the form first as our support team will ask for this information on our first reply email and it will save time: https://cam-do.com/search?type=page&q=ticket+support&view=search-support&submit=Search

Should you consider the product be faulty you can request to return the product within 6 months for our assessment. If the product is confirmed to be faulty by CamDo, return shipping costs will be refunded along with a full product refund (except SD Cards and GoPro cameras which cannot be returned once opened). Should the returned items be confirmed functional, a 25% restocking fee will apply to the refund. To initiate a return or exchange, please contact support@cam-do.com to receive an RMA number. Do not ship a product back to us without an RMA number. We will examine all returned items to confirm their condition and contact you regarding the status of your refund. Upon acceptance, please allow 2-3 weeks for the refund to process once the item is received.

We cannot support IT/wifi network/router/modem issues as there are too many variables. Please talk to your IT department/specialist/support team.

Any dismantling or modification(s) to CamDo products will void any warranty and cannot be returned.

GoPro products: HERO5 camera warranty issues are to be handled directly with CamDo. Any warranty issues with HERO6, HERO7, HERO8 and HERO9 cameras are to be handled directly between the customer and GoPro USA. Check out their warranty page here.

LumeCube products: Any warranty issues with LumeCube products are to be handled directly between the customer and LumeCube USA. Just email support@lumecube.com and they will take it from there. Check out their warranty page here.

Both GoPro and LumeCube are very responsive and is how their distribution model works - it is much quicker to get warranty response by emailing them directly.

EQUIPMENT PERFORMANCE LIMITATIONS

CamDo equipment is not fault-tolerant and not designed, manufactured or intended for use in extreme temperature or weather conditions, security surveillance, life support, emergency situations, hazardous or mission critical activities. You use CamDo equipment at at your own discretion and risk.

LIMITATION ON LIABILITY

The replacement warranty is as per the warranty section above. In addition, the replacement warranty is the whole and sole liability for the product. There are no other warranties, expressed or implied. Use of CamDo products confirms your agreement that CamDo Solutions Inc and its distributors will not be liable for any damages from or relating to CamDo Solutions Inc products. Please also note the Equipment Performance Limitations above.

Product Code: BAT03

Our V50 / 47Watt-Hour Lithium Polymer battery features two 5V USB output ports: both rated at 2A with a combined total of 3A available. The USB Battery Pack has the critical "Always On" operating mode that is required for long-term deployment using our UpBlink, BlinkX and Blink controllers.

About

Compatibility

FAQ's

Support

settings_powerTwo Operating Modes

usbTwo USB Outputs

battery_charging_fullReliable Charging Circuit

wb_incandescentLED Power Indication

Battery Specifications:

Frequently Asked Questions

What is your return/exchange/warranty policy?

EQUIPMENT PERFORMANCE LIMITATIONS

LIMITATION ON LIABILITY

Two Operating Modes

Two USB Outputs

Reliable Charging Circuit

LED Power Indication

Construction Camera Pack Upgrades

47 Wh (V50) Battery

SanDisk Extreme Micro SD card, 128GB with SD Adapter